The TMF 1.0 is a combination clock and timer display.
The perfect solution wherever you need a time-of-day display, minute downcounter, or both.
If the specifications aren't exactly what you need, inquire about customization for your particular requirements.
Shown below are the TMF circuit board and a custom podium clock/timer we manufactured for one of our customers.
This section explains the operation of the standard TMF. The software (firmware to be more precise) can be customized for a variety of timing functions, inputs, and display formats. Please contact Lucid Technologies about your specific requirements.
The Mode switch places the TMF 1.0 in either Clock or Timer (Minute Downcounter) mode.
In Clock mode the display shows time in a 12-hour format. A separate LED indicates AM. The colon between the hours and minutes digits blinks every other second. In this mode the Set (Adjust) switch increases the time by 25 minutes per second in the up position and 2 minutes per second in the down position.
In Timer mode the AM LED, colon, and hours digits are all blanked. The Set switch increases the minutes by 10 per second in the up position and decreases the minutes by 2 per second in the down position. After setting the desired number of minutes, the display will countdown to 00, at which time the 00 display will flash.
Time of day is maintained while in Timer mode and minutes downcount continues while in Clock mode. This allows switching from one mode to the other without disrupting the function of either mode.
WHAT COMES WITH THE TMF 1.0 ?
With each TMF 1.0 purchase you receive:
WHAT ELSE DO I NEED?