PM-WW - Wire-Wrap Programming-Module/prototype board

The PM-WW is an excellent prototyping board and the perfect starting point for building any of the LP120 or LP130 Programming Modules.

Dimensions:

Width = 4.5 inches (114.3 mm); Height = 4.5 inches (114.3 mm), including edge connector. Edge Connector = 44 fingers (22 per side) on 0.156 inch (3.96 mm) spacing.

Hole Pattern:

One pad per edge finger in two rows. Uncommitted pads are on 0.1 inch (2.54 mm) grid, 42 pads horizontally and 35 pads vertically.

Printed Circuit Board:

The board is FR4 fiberglass, 0.062 inch (1.6 mm) thick, with gold plated pads and edge fingers, and soldermask on both sides.